OFFICAL BLOG 笢恅唳 | ENGLISH

Customer service hotline : 400-600-5217      010-84917838

Your current positionㄩhomepage  

brandㄩMONITOR

nameㄩMicrowave solid flowmeter-MONITOR SFI

introductionㄩThe Model SFI Solids Flow Indicator can be used to infer the relative amount of flowing material within the target conduit (by
monitoring the available analog signal). However, it should be noted that this device provides an output that should be considered,
at best, a very rough estimate of the flow of material.The analog signal corresponds to the magnitude of the Doppler-shifted energy created by the flow of material through the microwave energy field.

  • Powder coated Nema 4 cast aluminum construction
    Approved for Class II hazardous areas
    Meets applicable FCC regulations
    Screw-on/off cover
    Teflon® process seal is standard
    15-30VDC/Analog three-wire input/output (SFI only)
  • TRANSCEIVER
    Power:15-30VDC, 100mA max.
    Enclosure: Die-cast aluminum, polyester coated (beige)
    Enclosure Protection: NEMA 4, IP66
    Operating Temperature: -13?to +185?F (-25?to +85?C)
    Process Temperature: 250?F (121?C) if ambient air temp. below
                         150?F (65?C)
    Process Seals: TFE Teflon? Ryton?BR>Pressure Ratings: TFE Teflon?(75 psi intermittent)
    Ryton?(300 psi)
    Process Connection: 1 1/4" NPT (1-1/2?w/ SS Adapter)
    Conduit Connection: (2) 1/2" NPT
    Detection Range: 0 to 10?free air, env. and target dependent
    Sensitivity: Switch selectable HI/LOW
    Minimum Velocity: 2.5 ft/sec
    Output:4-20mA
    Isolation (SFI Only): 750 VPK isolation b/w sensor ground and
                          user power supply/analog supply
    Indicators: Green LED ?power
                Yellow LED ?loop, intensifies with
                              disturbance detected
    Emission: 24.125 GHz, FCC & IC certified, energy
              levels less than 1mW/cm2 (OSHA limit at
              10mW/cm2)
    Approvals: FM, CSA, Class II Div. 1& 2 Groups E, F & G
               CE Mark (SFI Only)

  • Please call conasen hotline 4006005217 for details!
Related products
Site mapLegal NoticeContact us
©2007 Beijing Conasen technology CO.,LTD All rights reserved

Major Product CategoriesㄩLevel    Pressure    Flow    Temperature    Analysis    Display    Others

Site KeywordsㄩUE    FLOWLINE    MONITOR    NIVELCO    FLEXIM    SIKA    PRICISION DIGITAL